Advanced visible-light photocatalytic property of biologically structured carbon/ceria hybrid multilayer membranes prepared by bamboo leaves

Biologically structured carbon/cerium dioxide materials are synthesized by biological templates. The microscopic morphology, structure and the effects of different oxidation temperatures on materials are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) ultraviolet-visible light spectrum (UV–Vis) and X-ray Photoelectron Spectroscopy (XPS). Moreover, by splitting water under visible light irradiation, the hydrogen production is measured to test the photocatalytic property of these materials. The results show that materials made with bamboo biological templates which are immersed in 0.1 mol L^?1 of cerium nitrate solution, then carbonizated in nitrogen (700 °C) and oxidized in air (500–600 °C), can obtain the biological structure of bamboo leaves. The product is in the composition of hybrid multilayer membrane, which one is carbon membrane form plant cell carbonation and another is ceria membrane by nanoparticle self assembly. The best oxidation temperature is 550 °C and the band gap of carbon/cerium dioxide materials synthesized at this optimum oxidation temperature could be reduced to 2.75 eV. After exposure to visible light for 6 h, the optimal hydrogen production is about 302 μmol g^?1, which is much higher than that of pure CeO₂.     

Rice spike-like g-C3N4/TiO2 heterojunctions with tight-binding interface by using sodium titanate ultralong nanotube as precursor and template

A novel rice spike-like g-C₃N₄/TiO₂ nanowire heterojunctions are fabricated by hydrothermal treating Na₂Ti₃O₇ ultralong nanotubes in the presence of g-C₃N₄. The presence of g-C₃N₄ promotes the hydrolysis of Na₂Ti₃O₇ ultralong nanotubes. The partially replaced O of TiO₂ by N from g-C₃N₄ leads to the formation of a tight-binding interface between one dimensional TiO₂ and two dimensional g-C₃N₄, which is crucial for fast and effective transfer of photogenerated electrons in heterostructured photocatalysts. As a result, the g-C₃N₄/TiO₂ nanowire heterojunctions exhibit excellent visible-light photocatalytic activity. The kinetic constant (k) of g-C₃N₄/TiO₂ (0.024?min^?1) for degradation of methylene blue under visible light irradiation is 1.85 and 4 times than that of pure g-C₃N₄ and P25, respectively.     

Synthesis and electrochemical performance of three-dimensional ordered hierarchically porous Li4Ti5O12 for high performance lithium ion Batteries

In this work, a three-dimensional ordered hierarchically porous (3DOHP) Li₄Ti₅O₁₂ that possesses inner-particle mesopores resulting from a soft template method and a three-dimensional ordered macroporous (3DOM) Li₄Ti₅O₁₂ using polystyrene spheres as a hard template have been synthesized. Both 3DOM Li₄Ti₅O₁₂ and 3DOHP Li₄Ti₅O₁₂ have ordered macropores and interconnected skeletons with a regular periodicity revealed by SEM and TEM observations. The specific surface area of 3DOHP Li₄Ti₅O₁₂ is up to 135 m² g^?1 which is much higher compared with that of 3DOM Li₄Ti₅O₁₂ because of the existence of inner-particle mesopores. Attributed to the higher surface area and smaller crystal grain size, more excellent cycle performance and rate capability are obtained for 3DOHP Li₄Ti₅O₁₂ compared to 3DOM Li₄Ti₅O₁₂. In addition, the hierarchically porous structure of 3DOHP Li₄Ti₅O₁₂ can meet rapid insertion and deinsertion of lithium ion even at extremely high rate. It is apparent that 3DOHP Li₄Ti₅O₁₂ has a lower total resistance and faster Li⁺ diffusion coefficient compared to 3DOM Li₄Ti₅O₁₂ according to electrochemical impendence spectroscopy analysis.     

Enhanced piezoelectric and ferroelectric properties of BiFeO3-BaTiO3 lead-free ceramics by optimizing the sintering temperature and dwell time

0.7BiFeO₃-0.3BaTiO₃ (BFO-0.3BT) ceramics were prepared to uncover the impacts of sintering temperature (T_S) and dwell time (t_d) on the microstructure and electrical properties. With increasing the T_S or t_d, the grain sizes increase along with the porosity decreases, which is in favor of the alignment of dipole. However, excess T_S or t_d are inclined to cause the volatilization of Bi₂O₃, which deteriorates piezoelectric properties. Because of the R-T two-phase coexistence, low defect ions concentration and porosity, as well as appropriate grain size, the excellent d₃₃?=?208?pC/N and k_p?=?35.46% as well as P_r?=?28.52?μC/cm² were achieved in BFO-0.3BT ceramics at T_S?=?1000?°C and t_d?=?6?h. In addition,large unipolar strain 0.13% and d₃₃*?=?256.2?pm/V also were obtained in BFO-0.3BT ceramics at T_S?=?1000?°C and t_d?=?6?h. This research indicates that the porosity and defect ion concentration as well as grain size also play an important role in piezoelectric properties in BFO-BT ceramics.     

Significantly enhanced breakdown field in Ca1-xSrxCu3Ti4O12 ceramics by tailoring donor densities

Significantly enhanced breakdown field of 24.52 kV cm^?1 as well as noteworthy nonlinear coefficient of 8.11 and low dielectric loss of 0.077 were obtained in Ca_0.6Sr_0.4Cu₃Ti₄O₁₂ ceramic. It was proved from impedance spectra that improved breakdown field was attributed to enhanced grain boundary resistance and elevated Schottky barrier height, which was further found resulting from reduced donor densities in C-V measurements. In addition, it was found that the activation energy originated from oxygen vacancies was increased, indicating the generation of oxygen vacancies was suppressed. Since oxygen vacancies acted as donors in depletion layers, it is reasonable to deduce that the reduced donor density was mainly ascribed to the decreased oxygen vacancies. In conclusion, maximum integrated action of strong solid solution effect and weak Sr-stretching effect was achieved when Sr/Ca ratio is 40/60, leading to greatly elevated potential barrier height and enhanced breakdown field consequently.     

Li2AGeO4 (A = Zn,Mg): Two novel low-permittivity microwave dielectric ceramics with olivine structure

Two low-permittivity dielectric materials Li₂AGeO₄ (A?=?Zn, Mg) were prepared via the solid-state reaction method. X-ray diffraction analysis and Rietveld refinement indicated that both ceramics crystallize in an orthorhombic olivine structure with a space group Pmn2₁. Dense ceramics with high relative density and homogeneous microstructure were obtained. Li₂ZnGeO₄ densified at 1200?°C possessed a relative permittivity ε_r?=?6.5, a quality factor Q?×?f?=?35,400?GHz, and a temperature coefficient of resonant frequency. Li₂MgGeO₄ exhibited ε_r?=?6.1, Q?×?f?=?28,500?GHz, and τ_f?=?–74.7?ppm/°C when sintered at 1220?°C. Additionally, the large negative τ_f values of Li₂AGeO₄ (A?=?Zn, Mg) ceramics were successfully adjusted compensated by forming composite ceramics with CaTiO₃ and near-zero τ_f values of +2.9?ppm/°C and +5.8?ppm/°C were achieved in 0.92Li₂ZnGeO₄-0.08CaTiO₃ and 0.90Li₂MgGeO₄-0.10CaTiO₃, respectively.     

抗凝冰乳化沥青涂层的性能研究

为了研究自制融雪剂对抗凝冰乳化沥青涂层性能的影响,将自制固态型融雪剂按5%、10%、15%的比例加入乳化沥青制备涂层乳液,采用水煮法、摆式摩擦仪、电导率试验分别对涂层材料的粘附性、抗滑性能和抗凝冰性能进行了测试。结果表明:自制型融雪剂对乳化沥青与集料的粘附性影响不大;随着融雪剂掺配比例的增大,抗凝冰乳化沥青涂层的摩擦系数有所降低,但均满足规范要求;相比于普通沥青涂层,抗凝冰乳化沥青涂层的抗凝冰性能得到改善,且随着融雪剂掺配比例的增大,凝冰性能逐渐提高。     

食用百合高效生态栽培技术

文章从食用百合的经济意义入手,分析了现阶段百合生产存在的问题,总结了食用百合高效生态栽培技术,期望为食用百合的栽培提供理论基础与实践经验。     

A Biomimetic Hybrid Hydrogel Based on the Interactions between Amino Hydroxyapatite and Gelatin/Gellan Gum

In this work, a gelatin (Gel)‐oxidized gellan gum (OG)/amino hydroxyapatite (mHap) hybrid hydrogel with Schiff base linkages is reported. The mHap is obtained by modifying hydroxyapatite with tetraethyl orthosilicate and 3‐aminopropyl‐triethoxysilane. The effects of different mHap contents on the structure, morphology, and properties of hydrogels are particularly investigated. Scanning electron microscopy coupled with energy dispersion spectroscopy reveals that mHap of around 100 nm is uniformly distributed inside the hydrogel with interconnected porous structures. Notably, the hydrogel with 1 wt% mHap possesses the highest compressive stress (2.01 ± 0.10 MPa) at 90% strain, as well as the lowest equilibrium swelling ratio (97% ± 5%) and degradation rate than other hydrogels. Besides, an ultra‐high compressive stress equivalent to 91% of the initial stress can be obtained by this hydrogel after 50 loading‐unloading cycles (85% strain). Meanwhile, after being swollen, this improved hydrogel also exhibits better structural stability than Gel‐OG hydrogel. The in vitro 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay further shows that all hydrogels are nontoxic against mouse fibroblasts. This work provides a biomimetic strategy to construct the organic/inorganic hydrogels with excellent interactions, elasticity, reversibility, and biocompatibility, which is of great importance for the practical applications in cartilage tissue engineering.     

热等静压处理对K439B高温合金显微组织的影响

对K439B合金进行了1165 ℃/150 MPa,4 h热等静压处理,采用光学显微镜和扫描电镜对比研究了铸态和热等静压态K439B合金的显微组织。结果表明:铸态K439B合金存在0.25%的显微疏松,热等静压后显微疏松基本消除(0.013%)。与铸态相比,经过热等静压处理后合金中的γ/γ′共晶组织体积分数和尺寸减小,各元素分布更加均匀,凝固偏析系数均更接近1。铸态K439B合金枝晶干处γ′相尺寸和体积分数分别是116.9 nm和17.8%,枝晶间部位γ′相尺寸和体积分数分别为244.4 nm和24.9%。热等静压后合金枝晶干部位的γ′相尺寸及体积分数分别为148.0 nm和17.5%,枝晶间部位γ′相尺寸和体积分数分别为159.1 nm和22.8%。热等静压处理使合金枝晶干、枝晶间部位的γ′相尺寸、体积分数和形貌接近,同时γ′相分布变得均匀。